Vanadium redox battery

src: i.ytimg.com

The vanadium redox battery (VRB) (or Vanadium flow battery) is a type of rechargeable flow battery that employs vanadium ions in different oxidation states to store chemical potential energy. The vanadium redox battery exploits the ability of vanadium to exist in solution in four different oxidation states, and uses this property to make a battery that has just one electroactive element instead of two. For several reasons, including their relatively bulky size, most vanadium batteries are currently used for grid energy storage, such as being attached to power plants or electrical grids.

The possibility of creating a vanadium flow battery was explored variously by Pissoort in 1930's, NASA researchers in the 1970s, and Pellegri and Spaziante in the 1970s, but none of them were successful in demonstrating the technology. The first successful demonstration of the all-vanadium redox flow battery which employed vanadium in a solution of sulfuric acid in each half was by Maria Skyllas-Kazacos at the University of New South Wales in the 1980s. Her design used sulfuric acid electrolytes, and was patented by the University of New South Wales in Australia in 1986.

The main advantages of the vanadium redox battery are that it can offer almost unlimited energy capacity simply by using larger electrolyte storage tanks, it can be left completely discharged for long periods with no ill effects, if the electrolytes are accidentally mixed, the battery suffers no permanent damage, a single state of charge between the two electrolytes avoids the capacity degradation due to a single cell in non-flow batteries, the electrolyte is aqueous and inherently safe and non-flammable, and the generation 3 formulation using a mixed acid solution developed by the Pacific Northwest National Laboratory operates over a wider temperature range allowing for passive cooling

The main disadvantages with vanadium redox technology are a relatively poor energy-to-volume ratio in comparison with standard storage batteries (although the Generation 3 formulation has doubled the energy density of the system), and the aqueous electrolyte makes the battery heavy and therefore only useful for stationary applications.

Numerous companies and organizations involved in funding and developing vanadium redox batteries include Vionx (formerly Premium Power), StorEn Technologies incubated at CEBIP-Stony Brook University, UniEnergy Technologies and Ashlawn Energy in the United States; Renewable Energy Dynamics Technology in Ireland; Gildemeister AG (formerly Cellstrom GmbH in Austria) in Germany; Cellennium in Thailand Rongke Power; Prudent Energy in China; Sumitomo in Japan; H2, Inc. in South Korea; redT in Britain., Australian Vanadium in Australia , and the now defunct Imergy (formerly Deeya).

Video Vanadium redox battery

Operation

A vanadium redox battery consists of an assembly of power cells in which the two electrolytes are separated by a proton exchange membrane. Both electrolytes are vanadium-based, the electrolyte in the positive half-cells contains VO₂⁺ and VO²⁺ ions, the electrolyte in the negative half-cells, V³⁺ and V²⁺ ions. The electrolytes may be prepared by any of several processes, including electrolytically dissolving vanadium pentoxide (V₂O₅) in sulfuric acid (H₂SO₄). The solution remains strongly acidic in use.

In vanadium flow batteries, both half-cells are additionally connected to storage tanks and pumps so that very large volumes of the electrolytes can be circulated through the cell. This circulation of liquid electrolytes is somewhat cumbersome and does restrict the use of vanadium flow batteries in mobile applications, effectively confining them to large fixed installations.

When the vanadium battery is being charged, the VO²⁺ ions in the positive half-cell are converted to VO₂⁺ ions when electrons are removed from the positive terminal of the battery. Similarly in the negative half-cell, electrons are introduced converting the V³⁺ ions into V²⁺. During discharge this process is reversed and results in a typical open-circuit voltage of 1.41 V at 25 °C.

Other useful properties of vanadium flow batteries are their very fast response to changing loads and their extremely large overload capacities. Studies by the University of New South Wales have shown that they can achieve a response time of under half a millisecond for a 100% load change, and allowed overloads of as much as 400% for 10 seconds. The response time is mostly limited by the electrical equipment. Sulfuric acid-based vanadium batteries only work between about 10 and 40 °C. Below that temperature range, the ion-infused sulfuric acid crystallizes. Round trip efficiency in practical applications is around 65-75 %.

Proposed improvements

Second generation vanadium redox batteries (vanadium/bromine) may approximately double the energy density and increase the temperature range in which the battery can operate.

Despite the traditional pumping requirements, nanoFlowcell AG has developed a proprietary system of energy storage for electric vehicle applications showcased through a number of Quant vehicle prototypes, using rapid replacement of electrolyte to refuel the battery.

Maps Vanadium redox battery

Specific energy and energy density

Current production vanadium redox batteries achieve a specific energy of about 20 Wh/kg (72 kJ/kg) of electrolyte. More recent research at UNSW indicates that the use of precipitation inhibitors can increase the density to about 35 Wh/kg (126 kJ/kg), with even higher densities made possible by controlling the electrolyte temperature. This specific energy is quite low compared to other rechargeable battery types (e.g., lead-acid, 30-40 Wh/kg (108-144 kJ/kg); and lithium ion, 80-200 Wh/kg (288-720 kJ/kg)).

src: i.ytimg.com

Applications

The extremely large capacities possible from vanadium redox batteries make them well suited to use in large power storage applications such as helping to average out the production of highly variable generation sources such as wind or solar power, helping generators cope with large surges in demand or leveling out supply/demand at a transmission constrained region.

The limited self-discharge characteristics of vanadium redox batteries make them useful in applications where the batteries must be stored for long periods of time with little maintenance while maintaining a ready state. This has led to their adoption in some military electronics, such as the sensor components of the GATOR mine system. Their ability to fully cycle and stay at 0% state of charge makes them suitable for solar + storage applications where the battery must start each day empty and fill up depending upon the load and weather. Lithium Ion batteries, for example, are typically damaged when they are allowed to discharge below 20% state of charge, so they typically only operate between about 20% and 100%, meaning they are only using 80% of their nameplate capacity.

Their extremely rapid response times also make them superbly well suited to UPS type applications, where they can be used to replace lead-acid batteries and even diesel generators. Also the fast response time makes them well-suited for frequency regulation. Economically neither the UPS or frequency regulation applications of the battery are currently sustainable alone, but rather the battery is able to layer these applications with other uses to capitalize on various sources of revenue. Also, these capabilities make Vanadium redox batteries an effective "all-in-one" solution for microgrids that depend on reliable operations, frequency regulation and have a need for load shifting (from either high renewable penetration, a highly variable load or desire to optimize generator efficiency through time-shifting dispatch).

src: jes.ecsdl.org

Largest vanadium grid batteries

A 200 MW, 800 MWh (4 hours) vanadium redox battery is under construction in China; it is expected to be completed by 2018..

src: www.aiche.org

See also

• Polysulfide bromide battery
• Battery (electricity)
• Fuel cell
• Energy storage

src: jes.ecsdl.org

References

src: forschung-energiespeicher.info

Additional references

• Presentation paper from the IEEE summer 2001 conference
• UNSW Site on Vanadium batteries
• Report by World Energy
• World Map Of Global Vanadium Deposits Vanadium geology is fairly unusual compared to a base metals ore body.
• "Improved Redox Flow Batteries For Electric Cars". ScienceDaily/Fraunhofer-Gesellschaft. 13 October 2009. Retrieved 21 June 2014. 

src: www.valuewalk.com

External links

• VRB at UNSW
• VRB at everything2
• The Need for Vanadium Redox Energy Storage in Wind Turbine Generators Net electricity generation from all forms of renewable energies in America increased by over 15% between 2005 and 2009.

Source of the article : Wikipedia