The BMW C1 is an enclosed scooter manufactured by Bertone for BMW. Compared to a conventional scooter, the C1 offered extra safety features and protection from the elements. The rider would sit in a car-type seat (with a four-point seat-belt) and adopt a feet-forward posture. Introduced in 2000, it was available throughout Europe, but sales were disappointing and the C1 was discontinued in 2002. In 2009 the C1-E electric version was presented as a concept.
Video BMW C1
Models
The C1 was available in two versions, a 125 and a 200. The "125" has a 124 cc capacity four valve, four-stroke, water-cooled, fuel injected engine producing 15 brake horsepower (11 kW); the "200" has a 176 cubic centimetres (10.7 cu in) engine producing 18 brake horsepower (13 kW). Both engines were manufactured by Rotax and include a CVT gearbox. The C1 weighed approximately 185 kilograms (408 lb) with a 40/60 front/rear weight distribution.
The space behind the rider and outside the "cage" has any of three interchangeable uses: a large, lockable external storage box; a luggage rack; or a pillion seat
The C1 is arguably underpowered: an MCN review of the 125 model said, "The BMW C1's 125cc engine is an unremarkable four-stroke single producing a respectable 15bhp. But it's a heavy motorcycle at 185kg - all the 1000cc sports bikes weigh less".
Maps BMW C1
History
BMW's intention with the C1 was to appeal to car drivers in crowded city streets. The idea was to offer the convenience of a scooter or motorbike but without many of the associated dangers or hassles. The C1's most innovative design feature was its emphasis on safety. However, being secured by a seat belt could make slow speed handling and manoeuvring rather tricky until experience is acquired.
BMW added passive safety and car-like crash testing to the scooter. It claimed that in a head-on collision, the C1 offered a standard of accident protection comparable to a European compact car. That was the prime marketing strategy to convert car buyers; the C1 was claimed to be so safe that the rider did not need to wear a helmet to ride it. This was achieved by using two shoulder-height roll bars, a crumple zone around the front wheel and an aluminium roll cage creating a car-like safety cell. It also had twin seatbelts reminiscent of an aviation style four-point harness to keep the rider in place.
Many countries deemed the use of seatbelts in conjunction with wearing a helmet to be unsafe. The added strain on the riders neck from the added weight of the helmet could cause significant injury to the restrained rider even in a low speed head-on collision. Germany, Switzerland, Italy, France, Israel and Spain authorities were quick to allow an exception to the helmet law for the C1. However, poor C1 sales in the United Kingdom may in part be attributable to the British government's refusal of BMW's request to change helmet regulations for C1 riders. Another country that requires C1 riders to wear a helmet is Sweden, although wearing the seat-belts is voluntary. However both seat belts must be secured for the vehicle to move.
After selling 10,614 units in 2001, BMW only sold 2,000 units in 2002, and ceased production of the C1 in October 2002. It was never made available in the USA.
Factory options
BMW-supplied accessory options included:
- Anti-lock brakes (ABS)
- 'Fun Audio System' (music system, volume linked to speed)
- Interior reading light
- BMW Immobilizer alarm system
- Lockable glove box with power socket
- Sunroof (as opposed to the standard 'hard top')
- Heated grips and/or seat
- Headlights tilt angle adjustment (for different payloads)
- Windscreen wiper with washer fluid.
C1-E electric version
In 2009 BMW used the same layout for the C1-E, an electric scooter concept vehicle that it developed as part of the European safety project eSUM ("European Safer Urban Motorcycling"). The C1-E uses components supplied by electric scooter manufacturer Vectrix and is powered by a lithium-ion battery.
See also
- Cabin motorcycle
References
External links
Source of the article : Wikipedia
0 Comments